非线性杆单元荷载矩阵积分算子直接集成算法

在文献[1]的基础上，将积分算子直接集成单元刚度矩阵的方法扩展应用于非线性杆单元的荷载矩阵集成．该方法将分布荷载产生的内力函数分解为由未知参数表示的线形项，和与分布荷载特性相关的已知函数项的组合，计算积分算子，由积分算子的线形组合得到分布荷戟产生的杆件内力函数，从而得到荷载矩阵．该方法没有采用任何假定，具有广泛的普适性，能用于求解任意刚度分布杆件上作用任意分布荷载或集中荷载的单元荷载矩阵．对于刚度非连续、荷载分布非连续的情况，该方法避免了高斯数值积分的误差，具有更高的计算精度。     

PLASTIC LIMIT LOAD ANALYSIS OF DEFECTIVE PIPELINES

The integrity assessment of defective pipelines represents a practically important task of structural analysis and design in various technological areas, such as oil and gas industry, power plant engineering and chemical factories. An iterative algorithm is presented for the kinematic limit analysis of 3-D rigid-perfectly plastic bodies. A numerical path scheme for radial loading is adopted to deal with complex multi-loading systems. The numerical procedure has been applied to carry out the plastic collapse analysis of pipelines with part-through slot under internal pressure, bending moment and axial force. The effects of various shapes and sizes of part-through slots on the collapse loads of pipelines are systematically investigated and evaluated. Some typical failure modes corresponding to different configurations of slots and loading forms are studied.     

Post-buckling of cantilever columns having variable cross-section under a combined load

Post-buckling of a cantilever column is examined under a combined load consisting of a tip-concentrated load and a distributed axial load, through dynamic formulation. The formulation of the problem is based on the moment–curvature relationship. The two-point boundary value problem described by the governing equations is dependent on the frequency parameter and the two load parameters. The buckling loads are those loads at which the eigencurve, namely, the load versus frequency curve of the column meets the load axis. A simple and reliable iterative procedure to convert the two-point boundary value problem into an initial value problem is followed and solved the non-linear differential equations utilizing a fourth-order Runge–Kutta integration scheme. To demonstrate the potentiality of the adopted numerical scheme, linear vibration frequencies of truncated, tapered cantilever wedges and cones are determined and compared with the published analytical and test results. Buckling and post-buckling loads of a simply supported stepped column are obtained and compared with the published test results. The loads and deflections of non-uniform cantilever columns are obtained for various slopes at the tip. The interaction of load parameters for a free–free truncated conical column has also been examined. The numerical results indicate that the path represented by the two load parameters turns out to be nearly a straight line.     

泊松方程与双向张弦梁找形

根据双向张弦梁上、下弦的平衡荷载与索曲面及索拉力之间的关系，给出了上、下弦 所在曲面的泊松方程；给出了矩形边界和椭圆边界泊松方程的求解方法；通过算例验证了泊 松方程找形方法的正确性. 给出的泊松方程求解方法可以非常准确计算出双向张弦梁的 形状，便于在工程中应用.     

一种梁柱非线性分析新方法

提出了一种等截面梁柱非线性分析的新方法，即采用按幂函数的变截面法模拟梁柱截面刚度，建立了梁柱非线性分析的简化数学计算模型，并研究了梁柱从弹性到塑性状态时梁柱截面刚度的变化规律，通过与Chen法的比较证明了截面刚度按幂函数模拟的变截面法的正确性。在此基础上进一步应用变截面法讨论了单边塑性情况下偏心受压梁柱随偏心轴力P值的变化规律。此方法为进一步研究非线性梁柱结构提供了一种新的思路。     

不同体型建筑物尾流作用下的高层建筑的风荷载特性

采用高频底座力天平方法,研究了不同断面形状的施扰建筑对一典型断面受扰建筑的静力和动力干扰影响,分析了正方形断面施扰建筑和非正方形断面施扰建筑的干扰效应的差异和产生差异的干扰机理。结果表明:施扰建筑断面形状的改变对静力干扰的影响不显著,但对于动力响应方面则有非常明显的影响。由于位于上游的切角断面施扰建筑脱落的在其尾流中的漩涡频率要明显大于正方形断面施扰建筑的涡脱频率,使得其产生的最大包络动力干扰因子值(EIF)要显著高于断面为正方形施扰建筑的EIF值,最大可达4.41(顺风向)和3.69(横风向),相比断面为正方形的高出142%和82.7%。     

移动荷载作用下地基动力分析的有限元方法

通过对地基动力问题的基本方程进行变换,把基本方程变换到随荷载移动的运动坐标系中,通过加权残数法推导了相应的单元刚度矩阵,从而建立了移动问题的有限元格式,并发现移动荷载问题的单元刚度矩阵是对相应静力问题单元刚度矩阵的修正,在静力单元刚度矩阵的主对角元素上增加与移动速度有关的项,即可得到移动问题有限元的单元刚度矩阵,这样就将动力学问题转化为“拟静力”问题处理。文中用移动问题有限元方法计算了地基的动力响应,并与解析解进行了对比,以说明本方法具有较好的精度。     

Steering forces on undriven tractor wheel

The steering forces on an undriven, angled wheel mounting a 6-16 8PR tire were measured on a wheel test carriage at zero camber angle and at 1.5 km/h forward speed in a soil bin with sandy clay loam soil. The lateral force developed was found to be a function of slip angle, normal load, and inflation pressure for a particular soil condition. An exponential relationship could estimate the coefficient of lateral force of the 6-16 tire. The coefficients of this equation were found to be linearly related to inflation pressure. Rolling resistance of the wheel tested was found to be a function of slip angle, normal load, and inflation pressure for the soil condition tested. A linear relationship existed between the rolling resistance and slip angle, where the coefficients were found to be a function of inflation pressure and normal load. The generalized equations developed in the present study for estimating coefficients of lateral force and rolling resistance by taking both the tire and operating parameters into account, were found to be reasonably good by looking at the high coefficient of determination between experimental and estimated values.     

连续体结构拓扑优化应力约束凝聚化的ICM方法

为克服应力约束下拓扑优化问题约束数目多、应力敏度计算量大的困难，提出 了应力约束化凝聚化的ICM方法. 在利用Mises强度理论将应力约束转换成应变能约束后， 提出了应力约束凝聚化的两条途径：其一为应力全局化的方法，其二为应力约束集成化的方 法. 由此建立了多工况下以重量为目标、以凝聚化应变能为约束的连续体结构优化模型，并 利用对偶理论对优化模型进行了求解. 4个数值算例表明：该方法具有较高的计算效率，得 到的拓扑结构比较合理，不仅适用于二维连续体结构，也适用于三维连续体结构.     

Nonlinear stability of large k-value shallow spherical shells with a symmetrically distributed line load

In this paper, we treat the nonlinear stability problem of shallow spherical shells with large values ofk(k=12(1–v) · 2f/h,f = shell rise,h = shell thickness) under the action of uniformly distributed line load along a circle concentric with the shell boundary. Load-deflection curves are computed at successive increments of uniformly distributed line loads by using both cubic B-spline approximations and iterative techniques. Our algorithm yields fairly good convergent results for values ofk as large as 400. The limiting case in which shells are loaded along a circle of small radius has been specially investigated and the computed critical loads are compared with those obtained with central point loads by other authors.